ComputerBase (@ComputerBase@mastodon.social)
Raspberry Pi Imager: Version 2.0.3 soll robuster werden https://www.computerbase.de/news/apps/raspberry-pi-imager-version-2-0-3-soll-robuster-werden.95824/ #RaspberryPiImager #RaspberryPi
Show Original Post
r (@r@fed.brid.gy)
Getting started with SONOFF Dongle Plus MG24 Zigbee adapter using Home Assistant
Show Original Post
VTDARKSIM (@VTDARKSIM@toot.community)
Flashed #HAOS to a SSD and set up #HomeAssistant on the new 8GB #RaspberryPi today. Memory & Swap usage dropped from 78% & 100% respectively on the #RPi3 to 12% & 0% on the new #RPi5. Probably overkill but that baby is hummin’ along now!
Show Original Post
craig_groeschel (@craig_groeschel@zeroes.ca)
"My cat kept jumping on the counter, so I built a robot."
https://youtu.be/b9DP2-Rjjgw
Show Original Post
xylophilist (@xylophilist@mastodon.online)
2026-01-16 03:25:52 M 6.0 - off Oregon coast
Right on the Juan de Fuca & Pacific plate boundary. Beach-ball consistent with the orientation of the plate boundary faults as well.
USGS: https://earthquake.usgs.gov/earthquakes/eventpage/us7000rq0d/executive
#earthquake #citizenscience #geology #seismology #raspberrypi #raspberryshake
Show Original Post
DoomsdaysCW (@DoomsdaysCW@kolektiva.social)
Tagging for #SolarPunkSunday, @blog !
Show Original Post
2026 (@2026@ahermitforhire.net)
links: Outdoor Raspberry Pi Setup: Complete Guide to Off-Grid Projects
https://raspberrytips.com/off-grid-pi-setup/
#offGrid #raspberryPi #solar #solarpunk #technologyI was curious about how to run a Raspberry Pi outdoors, so I did some research. If you’re thinking about trying it, or you’ve already run into problems like weak Wi-Fi or batteries that don’t last, this guide brings together the best tips I found.
Show Original Post
GurgleApps (@GurgleApps@mastodon.social)
We are now stocking #raspberrypi Pico 2W in our new Shop to compliment our Word Clock Kit. More products coming soon.
https://gurgleapps.com/shop/products/raspberry-pi-pico2w #stemEducation #Electronics
Show Original Post
fenixmaster (@fenixmaster@mastodon.social)
Pi-hole. De log files zullen wel volstromen met de installatie van het voorbeeld. Hoe houd ik dat in de gaten en hoe kan ik ze limiteren?
Show Original Post
freeearth (@freeearth@mastodon.social)
my #selfhosting started with #PiHole at the end of 2019 when I bought fresh #RaspberryPI 4.
In the next few years there was a lot of different #homelab setups (I'd say around 8-10 "servers").
At 2022 I've tried #Ansible and it was impressive. Pet-project helped a lot with servers maintenance.
Currently I've switched to #NixOS and there is another personal project for that. As server acts my "old" laptop with i7-8750H/32GB/256GB+256GB and Synology DS220j as NFS (4TB+4TB in mirror)
Show Original Post
pjacock (@pjacock@fediscience.org)
Found the first issue in my new #MechanicalKeyboard PCB design, the cut-out is not quite wide enough for the #RaspberryPi RP2040-Zero reset and boot buttons 😢
I’ll have to take a file to the PCB (outside well ventilated, with a mask on) 😷
Show Original Post
pjacock (@pjacock@fediscience.org)
My first under 10x10cm #MechanicalKeyboard PCBs arrived from JLCPLC - and they’re so tiny! Smol keyboard time - 15 or 16 keys on each half, and a 5-way navigation button, but no diodes using #GraphTheory http://astrobeano.blogspot.com/2025/12/5-way-switch-in-diode-free-graph-theory.html - and in further boundary pushing it should take a pair of #RaspberryPi RP2040-Zero or RP2350-Zero in TRRS wired mode, or the NRF52840 “Zero” controllers for Bluetooth (using opposite sides of the PCB rather than jumpers as they have almost equivalent footprints): https://codeberg.org/peterjc/pico-keyboards/src/branch/main/bivvy16d
Show Original Post